Local Appliance Tips & Guides
Near You in Houston, TX

A tub full of standing water is one of the top calls we get. Walk through these four checkpoints in order and you'll likely find the cause before a technician ever needs to.

Clothes coming out of the wash still dripping wet means the spin cycle didn't finish. Check the lid switch, the drive belt, and load balance first.

Where the water shows up — front, back, or underneath — tells you almost everything you need to know about what's causing a washer leak.

A washer that's walking across the laundry room floor almost always comes down to leftover shipping bolts, a load out of balance, or feet that need leveling — and all three are easy fixes.

Before you assume the control board has died, rule out a tripped breaker, an unlatched door, or a cycle that's simply paused.

That musty smell coming from a front-loader is mold feasting on leftover detergent film. A simple monthly habit gets rid of it for good.

Stuck with a locked door and a tub of water still inside? Here's the safe way to get it open.

When the cycle timer freezes partway through, the machine is usually waiting on water, drainage, or a balanced load — not signaling a dead control board.